The miniTG is a portable technical ground for your electronic and computer components. The miniTG can absorb stray RF/EMR floating around the component, ground the chassis, and provide a method to reduce circuit hum. Compact and easy to use, it helps improve audio clarity and system stability by minimizing unwanted interference and noise.
 
Utilising our EVO II absorption ceramic, we have implemented a 6N copper ground plane and brass hardware to optimise conductive performance. The EVO II absorption ceramic incorporates 23 distinct elements specifically designed to improve ground saturation and facilitate ionic conversion.
 
Each miniTG includes a complementary 0.75m ground cable for basic installation; ground cables from other manufacturers are also compatible.
 
How to use as a portable unconnected grounding device:
Place next to component on the power supply/transformer side.
Place overtop of sensitive digital circuits.
 
How to use as a portable connected grounding device:
Loosen chassis screw near power entry to attach ground cable. Attach the other end of the ground cable to the brass binging post of the miniTG. Finger tight the brass nut is all that is required.
 
Purchase aftermarket ground cables or connectors:
AC to USB A Connector: Remove the AC male plug from the cable. Carefully strip off one inch of the outer jacket insulation. Twist the exposed wire strands together. Loosen the nut on the miniTG binding post to reveal the center wire hole. Insert the prepared USB cable into the hole and wrap any remaining wire clockwise around the post. Secure the ground nut by tightening it by hand. Insert the USB A connector into an available USB port on your laptop or PC.
Attach the spade connector of the ground cable to the ground terminal of an AC male plug and tighten the ground screw to secure the connection. Connect the opposite end of the ground cable to the miniTG grounding post. Plug the AC male plug into a nearby wall outlet located close to the A/V system.
 
Please note that aftermarket ground cables ranging from 18 gauge to 10 gauge are compatible.
 
Size: 7.6" x 4.6" x 2.2" (194 x 117 x 57 mm.)